Discount Aluminium Venetian Blinds Window Blinds Custom Window Shades Window Coverings

This is the best value blind in our range. The I seek 25mm aluminium venetian blind offers a flexible approach to covering your window. Aluminium venetian blinds are not confined to being simply closed or open but may be angled to deflect light while continuing to make the best use of the natural environment.

Featured in our 25mm Aluminium Venetian blinds are swedish components designed and manufactured by Turnils. This includes the original and best 'Ultra Wand' to lift and tilt the blind (All cords are neatly tucked away within the wand.) This wand has now been copied by chinese manufacturers and sold in the Australian market - Beware of cheap imitations!

Our 25mm aluminium venetians are made are custom made to your exact sizes right here in Australia.

The I seek aluminium venetian collection brings together a great range of colours and finishes, including painted and metallic. Your options are endless.

25mm Aluminium Blind Closed

Colour - Brushed Aluminium

Width
Minimum 260mm
Maximum 3000mm

Drop
Minimum drop: 300mm
Maximum drop: 3000mm

Flush mounting
Space required for inside mount - 30mm

Operation
Left or right hand Ultra Wand - no more messy cords and 100% child safe!
NB: Ultra wand not available on blinds less than 400mm wide.

Slat
25mm aluminium

Head & Bottom Rail
Fully colour co-ordinated with the chosen slat colour.

Ladder Cords
100% high tenacity polyester
Colour co-ordinated with chosen slat colour

Installation
All necessary brackets and screws are supplied free of charge

30 day satisfaction guarantee (conditions apply)
Limited lifetime warranty (conditions apply)


Gloss White	Matt White	Shadow Grey	Gloss Black	Matt Black

Gloss Alabaster	Matt Alabaster	Raw silk	Light Cream	Biscuit	Soft Beige

Brushed Aluminium	Silver	Gun Metal Grey	Gun Metal	Royal Navy	Sea Breeze

Watch our How to Measure Video

Broadband Users	Dial-Up Users

Things to Remember

Always use a steel tape for accuracy - make sure the tape measure is straight and tight when you take your measurements

Always measure in millimetres (mm)

Measure all windows, even those that appear to be the same width and height

Don't forget the stacking height of your chosen blind (refer to the table at the bottom of this page)

Do not take any deductions (i seek will do this for you)

Inside Mount

Measure Venetian Blind Inside Mount

To measure a Venetian blind on the inside of your window frame you need at least 30mm depth for a flush mount. With this depth, the blind will go up and down without any obstruction.

Ensure you look for any knobs, handles, winders or the inner window frame that may obstruct the blind. If you have any obstructions you will need to mount your blind to the outside of your window frame.

Where to Measure - Inside Mount
Width	Where to Measure - Top, Centre & Bottom
	Measurement to Take - shortest
Drop	Where to Measure - Left, Centre & Right
	Measurement to Take - shortest

Do not take any deductions as we will do this for you.

Choose which side you want your controls - either left or right and confirm you have measured the inside of the frame.

Outside Mount

Measure Venetian Blind Outside Mount

To measure a Venetian blind on the outside of your window frame measure the width from the edge of the architrave to the edge of the architrave at the top of your window frame.

Measure the drop from the top of the architrave to the bottom of the architrave. This measurement may be increased if you want your blind to drop past the bottom of your window frame or to the floor.

Where to Measure - Outside Mount
Width	Where to Measure - Top
	Measurement to Take - Actual
Drop	Where to Measure - Left
	Measurement to Take - Actual

Choose which side you want your controls - either left or right and confirm you have measured the outside of the frame.

I Seek Blinds will not make any deductions for outside mounted blinds.

Corner Windows

If you have a corner window where the blinds need to meet for maximum privacy, measure one blind as a through blind and one blind as a butt blind. When measuring the butt blind you need to deduct 32mm off the measurement.

Stacking Height

Stack Height - Raised Blind (Important to consider for door ways)
Drop of blind (mm)	500	1000	1500	2000
Stack height (mm)	46	64	82	100

Watch our How to Install Video

Broadband Users	Dial-Up Users

Inside Mount Your blind will come with installation brackets and screws. Once unwrapped always handle your venetian blind from underneath the metal head rail. Follow these steps for an easy installation: Brackets (Fig 1) are to be placed 90mm from each end and evenly throughout the rest of the blind. Make sure the middle brackets are placed between the ladder tapes so they do not interfere with the inner workings of the blind. Use a pencil to mark bracket positions. Now place one screw through the top of each bracket to the underside of the window frame. (Figure 2) To install your blind, hold the blind from underneath the metal head rail and hook the front lip of your head rail over the entire brackets (Figure 3). Note the slight angle on the head rail when installing. Push the head rail toward the window to get the rear of the head rail to hook under the rear lip. This can generally be done in one action but with larger blinds you may need to work from one side to the other. Your blind is now installed - and can be lowered.	Figure 1 Figure 2 Figure 3
	Figure 1 Figure 2 Figure 3
Outside Mount
Your blind will come with installation brackets and screws. Once unwrapped always handle your venetian blind from underneath the metal head rail. Follow these steps for an easy installation: Brackets (Fig 4) are to be placed 90mm from each end and evenly throughout the rest of the blind. Make sure the middle brackets are placed between the ladder tapes so they do not interfere with the inner workings of the blind. Use a pencil to mark bracket positions. Now place one screw through the back of each bracket to the front of the window frame. (Figure 5) To install your blind, hold the blind from underneath the metal head rail and hook the front lip of your head rail over the entire brackets (Figure 3). Note the slight angle on the head rail when installing. Push the head rail toward the window to get the rear of the head rail to hook under the rear lip. This can generally be done in one action but with larger blinds you may need to work from one side to the other. Your blind is now installed - and can be lowered.	Figure 4 Figure 5
To remove your blind
Raise the blind. Push against the front of the head rail to release the rear lip from the bracket. Remove the blind from the front lip.

Regular cleaning of your 25mm Aluminiun Venetian blinds will help minimise dust buildup.

Extend your blinds all the way.
Tilt the slats up and dust lightly with a cloth or duster.
Tilt the slats down and dust the other side lightly with a cloth or duster.
To avoid damage, don’t exert too much pressure or crimp the slats.
A vacuum cleaner may also be used. Place the soft brush attachment on the hose and run very lightly over the slats first in their up position then in their down position. You should first test a small area of the blinds to make sure the suction is not too great. Some vacuums may damage the slats.
For individual stains on any given slat, spray with non-abrasive cleaner, wait 1 to 2 minutes, and wipe with a soft cloth.

Discount Window Blinds Custom Window Shades & Window Coverings Ph: 1300 664 257

25mm Aluminium Venetian blinds

Discount Window Blinds
Custom Window Shades & Window Coverings
Ph: 1300 664 257