Roman Blinds

Overview
Specifications
Fabrics
How to Measure
How to Install
Photos
Cleaning

Find the perfect Roman Blinds for you in the iseekblinds.com.au collection. Our Roman Blinds feature both block out and light filtering fabrics. They also come in a range of natural and strong contemporary colours, so you’ll be find just what your room needs.

No Holes

Our cleverly designed back batten system means no stitch holes, no puckering, and no light penetration. Our Roman Blinds look better, neater and more refined. And all come with a heavy-duty cord lock.

Check out our Back Batton System, No Pin Holes, No Puckering,
No Light Penetration!

Width
Minimum width: 250mm
Maximum width: Ranges between 2400mm & 3000mm depending on fabric selected

Drop
Minimum drop: 250mm
Maximum drop: 3000mm

Flush mounting
Flush mounting space required for inside mount: 40mm (for standard headboard)

Operation
Left or right hand cord
All blinds are supplied with a Cord lock at no extra cost

Fabrics
Block out and light filtering fabrics available

Head Rail
Standard is a 40mm x 19mm wooden headrail
Other sizes available at no extra cost:
- 20mm x 19mm
- 70mm x 19mm
- 90mm x 19mm
- 120mm x 19mm

Bottom Rail
Flat wooden rail enclosed in a 50mm pocket

Back Battens
Aluminium powder coated back batten system - No Stitch holes - No Puckering!

Acorn and Cleat
Acorn and clear polycarbonate cleat supplied

Installation
All neccessary brackets and screws are supplied free of charge

30 day satisfaction guarantee
(conditions apply)

Limited lifetime warranty
(conditions apply)

Fabric Widths & Price Guide
Fabric Collections	Maximum Width	Maximum Drop	Price Guide
Mercury - Light Filtering	2500mm	3000mm	$
Tuscany - Light Filtering	3000mm	3000mm or 2500mm if width over 2800mm	$
Tuscany - Blockout	3000mm	3000mm or 2500mm if width over 2800mm	$$
Mercury - Blockout	2500mm	3000mm	$$
Dunes - Blockout	2800mm	3000mm	$$
Comet - Blockout	3000mm	3000mm or 2200mm if width over 2500mm	$$
Sienna - Blockout	3000mm	3000mm or 2500mm if width over 2800mm	$$$
Urban Shade - Blockout	3000mm	3000mm or 2100mm if width over 2400mm	$$$
Kiribati - Light Filtering & Room Darkening	2800mm	3000mm	$$$$
5th Avenue - Blockout	2400mm	3000mm	$$$$$

Roll over the small colours to see a bigger view on the right.

Mercury Light Filtering & Block Out

Our Mercury range comes in both full block out and light filtering fabric. The fabric is 80% Polyester and 20% Polyester Cationic with an acrylic foam backing on the block out range. Mercury comes in a range of 10 fashionable colours sure to suit anyone’s décor!

Maximum width 2500mm – Maximum drop 3000mm

Mercury White

Mercury Snow

Mercury Cream

Mercury Putty

Mercury Ash

Mercury Moss

Mercury Chocolate

Mercury Steel

Mercury Petrol

Tuscany Light Filtering & Block Out

Our Tuscany range is a beautifully textured fabric that comes in both full block out and light filtering. The fabric is 85% Polyester and 15% Cationic Polyester with an acrylic foam coating on the block out fabric. The range comes in 10 fashionable colours sure to suit any décor!

Maximum width 3000mm – Maximum drop 3000mm – If width over 2800mm then max drop of 2500mm applies

Tuscany Parchment

Tuscany Eggshell

Tuscany Oatmeal

Tuscany Biscotti

Tuscany Stone

Tuscany Bisque

Tuscany Earth

Tuscany Ash

Tuscany Smoke

Tuscany Charcoal

Dunes Block Out

Our Dunes range comes in 9 colours to suit any décor! It’s a full block out fabric using 100% Polyester that is protected by Teflon® Fabric protector.

Maximum width 2800mm – Maximum drop 3000mm

Dunes Stark White

Dunes Snow

Dunes Rice

Dunes Oyster

Dunes Cashew

Dunes Pebble

Dunes Celedon

Dunes Wedgewood

Dunes Mahogany

Comet Block Out

Our Comet range is a full block out fabric that is 50% Polyester / 50% Polyester Cationic. Comet presents beautifully and comes in a range of 10 colours sure to suit any décor!

Maximum width 3000mm – Maximum drop 3000mm – If width over 2500mm then max drop of 2200mm applies

Comet White

Comet Snow

Comet Eggshell

Comet Flesh

Comet Bisque

Comet Rock

Comet Fern

Comet Caramel

Comet Thistle

Comet Truffle

Sienna Block Out

Our popular Sienna range is 100% Polyester fabric. It offers over 97.5% Ultraviolet protection against the sun’s harmful rays making it a quality fabric. It comes in a large range of 12 colours sure to suit any décor!

Maximum width 3000mm – Maximum drop 3000mm – If width over 2800mm then max drop of 2500mm applies.

Sienna White

Sienna Neutral

Sienna Vanilla

Sienna Cream

Sienna Pewter

Sienna Atlantic

Sienna Fern

Sienna Linen

Sienna Balsa

Sienna Almond

Sienna Sultana

Sienna Black

Urban Shade Block Out

Our popular Urban Shade range is 100% Polyester block out fabric with an acrylic suede backing. It’s available in 11 fashionable colours to suit any décor! It’s a soft and supple fabric that presents beautifully on any window within your home!

Maximum width 3000mm – Maximum drop 3000mm – If width over 2400mm then max drop of 2100mm applies.

Urban Shade
White

Urban Shade
Birch

Urban Shade
Barley

Urban Shade
Alabaster

Urban Shade
Quick Sand

Urban Shade
Caramel

Urban Shade
Pebble

Urban Shade
Pewter

Urban Shade
Seal

Urban Shade
Charcoal

Urban Shade
Black

Kiribati Light Filtering

Our Kiribati Light Filtering & Room Darkening fabric has the appeal of an all-natural Blind Fabric but is made of 76% Polyester / 24% Cotton. This fabric provides more than 97.5% protection against the sun’s harmful rays making it a quality fabric. It comes in a range of 6Light Filtering and 3 Room Darkening colours.

Maximum width 2800mm – Maximum drop 3000mm

Kiribati Madagascar

Kiribati Majorca

Kiribati Maui

Kiribati Macau

Kiribati Molokai

Kiribati Matangari

Kiribati Montego - Room Darkening

Kiribati Malakula - Room Darkening

Kiribati Mauritius - Room Darkening

5th Avenue Block Out

Our 5th Avenue range is a beautiful textured fabric that comes in a lovely range of 12 colours to suit every décor. It’s 100% Polyester with acrylic foam backing providing a full block out feature. 5th Avenue is our top of the range fabric!

Maximum width 2400mm – Maximum drop 3000mm

5th Avenue Blanc

5th Avenue
Pearl

5th Avenue
Raw Silk

5th Avenue
Malt

5th Avenue
Avocado

5th Avenue
Chintz

5th Avenue
Bossanova

5th Avenue
Dove

5th Avenue
Martina

5th Avenue
Tango

5th Avenue Yarwood

5th Avenue Espresso

Watch our How to Measure Video

Broadband Users	Dial-Up Users

Things to Remember

Always use a steel tape for accuracy - make sure the tape measure is straight and tight when you take your measurements

Always measure in millimetres (mm)

Measure all windows, even those that appear to be the same width and height

Don't forget the stacking height (height of blind when in the raised position) of a Roman Blind is approximately 300mm - see bottom of this page for more details

Do not take any deductions (i seek will do this for you)

Inside Mount

Measure Roman Blind Inside Mount

To measure a roman blind on the inside of your window frame you need at least 40mm depth for a flush mount. With this depth, the blind will go up and down without any obstruction.

Ensure you look for any knobs, handles, winders or the inner window frame that may obstruct the blind. If you have any obstructions you will need to mount your blind to the outside of your window frame.

Where to Measure - Inside Mount
Width	Where to Measure - Top, Centre & Bottom
	Measurement to Take - shortest
Drop	Where to Measure - Left, Centre & Right
	Measurement to Take - shortest

Do not take any deductions as we will do this for you.

Choose which side you want your controls - either left or right and confirm you have measured the inside of the frame.

Outside Mount

Measure Roman Blind Outside Mount

To measure a roman blind on the outside of your window frame measure the width from the edge of the architrave to the edge of the architrave at the top of your window frame, then add approximately 25mm for each side (if space permits) to give you better light control and privacy.

Measure the drop from the top of the architrave to 45mm past the bottom of the architrave for all elevated windows. If your window drops to the floor measure from the top of the architrave to the floor.

If you want to raise your roman blind above the window frame to maximise your view the stack height of a roman blind is approximately 300mm. Take this into consideration when measuring your drop (refer to the image below).

Where to Measure - Outside Mount
Width	Where to Measure - Top
	Measurement to Take - Actual (see above for additions)
Drop	Where to Measure - Left
	Measurement to Take - Actual (see above for additions)

Choose which side you want your controls - either left or right and confirm you have measured the outside of the frame.

I Seek Blinds will not make any deductions for outside mounted blinds.

Stack Height

If you want to raise your roman blind above the window frame to maximise your view the stack height of a roman blind is approximately 300mm. Take this into consideration when measuring your drop.

Watch our How to Install Video

Broadband Users	Dial-Up Users

Inside Mount

Your blind will be supplied with installation screws and gloves - no brackets are required.
Please ensure you wear your gloves before handling the blind. NB: You cannot return a roman blind for dirty marks as they are throughly examined before packaging.
Place your blind into the window frame (Fig 1) and screw directly through the head rail into the underside of the window frame.
For a secure fix place screws provided evenly across the underside of the head rail.
Install cleat provided into side of window frame.
Your blind is now installed - it can now be lowered.

Fig 1. Intalling a roman blind - inside mount
Figure 1

Outside Mount

Your blind will be supplied with gloves, right angle brackets and screws.
Please ensure you wear your gloves before handling the blind. NB: You cannot return a roman blind for dirty marks as they are throughly examined before packaging.
Brackets (Fig 2) are to be placed 100mm from each end of the architrave and evenly throughout the rest of the blind.
Place brackets in line with top of the architrave and screw into place using the middle oval shaped hole.
Place your blind on top of the architrave and the brackets (Fig 3). Don't forget your gloves!
Check that your blind is even across the window frame and screw through the bracket into the underside of the head rail (Fig 3 - Arrow).
Install cleat into side of window frame.
Your blind is now installed - it can now be lowered.

Figure 2

Fig 3. Outside mount bracket to be attached to the blind
Figure 3

Mercury Light Filtering & Blockout

This fabric should be regularly dusted/vacuumed with the appropriate attachment.
Do not wash/dry clean.
If spot cleaning is required, test in inconspicuous area first using a mild detergent solution.
Do not allow blinds to become fully wet.
Use damp cloth only.
Warm iron if required.

Tuscany Light Filtering & Blockout

This fabric should be regularly dusted/vacuumed with the appropriate attachment.
Do not wash/dry clean.
If spot cleaning is required, test in inconspicuous area first using a mild detergent solution.
Do not allow blinds to become fully wet.
Use damp cloth only.
Warm iron if required.

Dunes Blockout

This fabric should be regularly dusted/vacuumed with the appropriate attachment.
Do not wash/dry clean.
If spot cleaning is required, test in inconspicuous area first using a mild detergent solution.
Do not allow blinds to become fully wet.
Use damp cloth only.
Warm iron if required.

Comet Blockout

This fabric should be regularly dusted/vacuumed with the appropriated attachment.
Do not wash/dry clean.
If spot cleaning is required, test in inconspicuous area first using a mild detergent solution.
Do not allow blinds to become fully wet.
Use damp cloth only.
Warm iron if required.

Kiribati Light Filtering & Room Darkening

This fabric should be regularly dusted/vacuumed with the appropriated attachment.
Do not wash/dry clean.
If spot cleaning is required, test in inconspicuous area first using a mild detergent solution.
Do not allow blinds to become fully wet.
Use damp cloth only.
Warm iron if required.

Sienna Blockout

This fabric should be regularly dusted/vacuumed with the appropriate attachment.
Do not wash/dry clean.
If spot cleaning is required, test in inconspicuous area first using a mild detergent solution.
Do not allow blinds to become fully wet.
Use damp cloth only.
Warm iron if required.

Urban Shade Blockout

This fabric should be regularly dusted/vacuumed with the appropriate attachment.
Do not wash/dry clean.
If spot cleaning is required, test in inconspicuous area first using a mild detergent solution.
Do not allow blinds to become fully wet.
Use damp cloth only.
Warm iron if required.

5th Avenue Blockout

This fabric should be regularly dusted/vacuumed with the appropriate attachment.
Do not wash/dry clean.
If spot cleaning is required, test in inconspicuous area first using a mild detergent solution.
Do not allow blinds to become fully wet.
Use damp cloth only.
Warm iron if required.

	Standard install - Both blinds back rolled (click picture for larger view)
	Front Rolled - Both blinds are front rolled (click picture for larger view)
I Seek Blinds uses the best available aluminium roll tube for its roller blinds. This prevents any bowing of the roll tube resulting in wavy fabric. These specifications are the highest in the industry.
For blinds up to 2100mm wide we use 40mm aluminium roll tube.
For blinds widths between 2100mm and 2600mm we use 45mm aluminium roll tube.
For blinds greater than 2600mm wide we use 45mm heavy duty roll tube
Double Brackets (click picture for larger view)	Double Brackets Dimensions in mm (click picture for larger view)