Roman Blinds

Overview
Specifications
Fabrics
How to Measure
How to Install
Photos
Cleaning

Find the perfect Roman Blinds for you in the iseekblinds.com.au collection. Our Roman Blinds feature both block out and light filtering fabrics. They also come in a range of natural and strong contemporary colours, so you’ll be find just what your room needs.

No Holes

Our cleverly designed back batten system means no stitch holes, no puckering, and no light penetration. Our Roman Blinds look better, neater and more refined. And all come with a heavy-duty cord lock.

Order Your Free Colour Samples

Check out our Back Batton System, No Pin Holes, No Puckering,
No Light Penetration!

Roman Blind Down

Width
Minimum width: 250mm
Maximum width: Ranges between 2400mm & 3000mm depending on fabric selected

Drop
Minimum drop: 250mm
Maximum drop: 3000mm

Flush mounting
Flush mounting space required for inside mount: 40mm (for standard headboard)

Operation
Left or right hand cord
All blinds are supplied with a Cord lock at no extra cost

Fabrics
Block out and light filtering fabrics available

Head Rail
Standard is a 40mm x 19mm wooden headrail
Other sizes available at no extra cost:
- 20mm x 19mm
- 70mm x 19mm
- 90mm x 19mm
- 120mm x 19mm

Bottom Rail
Flat wooden rail enclosed in a 50mm pocket

Back Battens
Aluminium powder coated back batten system - No Stitch holes - No Puckering!

Acorn and Cleat
Acorn and clear polycarbonate cleat supplied

Installation
All neccessary brackets and screws are supplied free of charge

30 day satisfaction guarantee
(conditions apply)

Limited lifetime warranty
(conditions apply)

New Roman Blind fabrics just released, now you can match your holland and roman blinds.
Roll over the small colours below to see a bigger view on the right.
Palm Beach Light Filtering & Block Out Our Palm Beach range is made using natural fibres and is coated with an anti-fray coating. It comes in a range of 10 fashionable colours to suit any décor! Maximum width 3200mm – Maximum drop 3000mm – If width over 2400mm then max drop of 2100mm applies.
			Order Your Free Colour Samples
Palm Beach White	Palm Beach Beachsand	Palm Beach Natural

Palm Beach Eggshell	Palm Beach Barley	Palm Beach Antique

Palm Beach Samba	Palm Beach Sable	Palm Beach Stone

Palm Beach Chocolate	Palm Beach Slate
Yoko Light Filtering & Block Out Yoko is a contemporary shantung design available in 11 colours. It is available as light filtering and blockout. The blockout quality is flame retardant to Australian & European standards and has a 'soft to touch' flock coating, giving light, heat and UV control. Maximum width 3200mm – Maximum drop 3000mm – If width over 2400mm then max drop of 2100mm applies.
			Order Your Free Colour Samples
Yoko Salt	Yoko Shell	Yoko Castle

Yoko Glow	Yoko Shore	Yoko Cliff

Yoko Grove	Yoko Cobble	Yoko Vine

Yoko Hide	Yoko Raven

Kashmir Block Out Kashmir has a luxurious faux silk appearance, in a rich colour palette. The blackout quality is flame retardant to Australian, European and US standards with a flock coating which is soft to touch. Satin Weave - 100% Polyester with Foamed Acrylic Coating Maximum width 2410mm – Maximum drop 3000mm
			Order Your Free Colour Samples
Kashmir Champagne	Kashmir Chardonnay	Kashmir Vine

Kashmir Inca	Kashmir Dream	Kashmir Silver

Kashmir Thunder	Kashmir Plush	Kashmir Bronze

Kashmir Truffle	Kashmir Night
Daintree Light Filtering & Block Out Daintree is a 100% Polyester Fabric and is available as both a light filtering or blockout. The blockout has an Acrylic Backing for a Block Out finish. Maximum Width 2950mm & Maximum Drop 3000mm
			Order Your Free Colour Samples
Daintree White	Daintree Moon Stone	Daintree Seed Pearl

Daintree Raffia	Daintree Jute	Daintree Nutmeg

Daintree Dove	Daintree Otter	Daintree Graphite

Daintree Mink	Daintree Black
Ritz Block Out Ritz is a blockout fabric that is 100% Polyester with foamed acrylic backing. This attractive jacquard has a colour co-ordinated blackout backing. Maximum Width 2950mm & Maximum Drop 3000mm
Front	Front	Front	Order Your Free Colour Samples
Back	Back	Back
Ritz Pearl	Ritz Sago	Ritz Gum
Front	Front	Front
Back	Back	Back
Ritz Arena	Ritz Bistro	Ritz Espresso

Watch our How to Measure Video

Things to Remember

Always use a steel tape for accuracy - make sure the tape measure is straight and tight when you take your measurements

Always measure in millimetres (mm)

Measure all windows, even those that appear to be the same width and height

Don't forget the stacking height (height of blind when in the raised position) of a Roman Blind is approximately 300mm - see bottom of this page for more details

Do not take any deductions (i seek will do this for you)

Inside Mount

Measure Roman Blind Inside Mount

To measure a roman blind on the inside of your window frame you need at least 40mm depth for a flush mount. With this depth, the blind will go up and down without any obstruction.

Ensure you look for any knobs, handles, winders or the inner window frame that may obstruct the blind. If you have any obstructions you will need to mount your blind to the outside of your window frame.

Where to Measure - Inside Mount
Width	Where to Measure - Top, Centre & Bottom
	Measurement to Take - shortest
Drop	Where to Measure - Left, Centre & Right
	Measurement to Take - shortest

Do not take any deductions as we will do this for you.

Choose which side you want your controls - either left or right and confirm you have measured the inside of the frame.

Outside Mount

Measure Roman Blind Outside Mount

To measure a roman blind on the outside of your window frame measure the width from the edge of the architrave to the edge of the architrave at the top of your window frame, then add approximately 25mm for each side (if space permits) to give you better light control and privacy.

Measure the drop from the top of the architrave to 45mm past the bottom of the architrave for all elevated windows. If your window drops to the floor measure from the top of the architrave to the floor.

If you want to raise your roman blind above the window frame to maximise your view the stack height of a roman blind is approximately 300mm. Take this into consideration when measuring your drop (refer to the image below).

Where to Measure - Outside Mount
Width	Where to Measure - Top
	Measurement to Take - Actual (see above for additions)
Drop	Where to Measure - Left
	Measurement to Take - Actual (see above for additions)

Choose which side you want your controls - either left or right and confirm you have measured the outside of the frame.

I Seek Blinds will not make any deductions for outside mounted blinds.

Stack Height

If you want to raise your roman blind above the window frame to maximise your view the stack height of a roman blind is approximately 300mm. Take this into consideration when measuring your drop.

Watch our How to Install Video

Inside Mount

Your blind will be supplied with installation screws and gloves - no brackets are required.
Please ensure you wear your gloves before handling the blind. NB: You cannot return a roman blind for dirty marks as they are throughly examined before packaging.
Place your blind into the window frame (Fig 1) and screw directly through the head rail into the underside of the window frame.
For a secure fix place screws provided evenly across the underside of the head rail.
Install cleat provided into side of window frame.
Your blind is now installed - it can now be lowered.

Fig 1. Intalling a roman blind - inside mount
Figure 1

Outside Mount

Your blind will be supplied with gloves, right angle brackets and screws.
Please ensure you wear your gloves before handling the blind. NB: You cannot return a roman blind for dirty marks as they are throughly examined before packaging.
Brackets (Fig 2) are to be placed 100mm from each end of the architrave and evenly throughout the rest of the blind.
Place brackets in line with top of the architrave and screw into place using the middle oval shaped hole.
Place your blind on top of the architrave and the brackets (Fig 3). Don't forget your gloves!
Check that your blind is even across the window frame and screw through the bracket into the underside of the head rail (Fig 3 - Arrow).
Install cleat into side of window frame.
Your blind is now installed - it can now be lowered.

Figure 2

Fig 3. Outside mount bracket to be attached to the blind
Figure 3

Order Your Free Colour Samples

Vibe Blockout

Dust regularly and remove marks by sponging gently with mild detergent in luke warm water.

Palm Beach Light Filtering & Blockout

This fabric should be regularly dusted/vacuumed with the appropriate attachment.
Do not wash/dry clean. If spot cleaning is required, test in inconspicuous area first using a mild detergent solution.
Do not allow blinds to become fully wet.
Use damp cloth only.
Warm iron if required.

Kashmir Blockout & Yoko Light Filtering Blockout

This fabric should be regularly dusted/vacuumed with the appropriate attachment. Do not wash/dry clean.
If spot cleaning is required, test in inconspicuous area first using a mild detergent solution.
Do not allow blinds to become fully wet.
Use damp cloth only.
Warm iron if required.

Daintree Light Filtering & Blockout - Ritz Blockout

This fabric should be regularly dusted/vacuumed with the appropriate attachment. Do not wash/dry clean.
If spot cleaning is required, test in inconspicuous area first using a mild detergent solution.
Do not allow blinds to become fully wet.
Use damp cloth only.
Warm iron if required.

	Standard install - Both blinds back rolled (click picture for larger view)
	Front Rolled - Both blinds are front rolled (click picture for larger view)
I Seek Blinds uses the best available aluminium roll tube for its roller blinds. This prevents any bowing of the roll tube resulting in wavy fabric. These specifications are the highest in the industry.
For blinds up to 2100mm wide we use 40mm aluminium roll tube.
For blinds widths between 2100mm and 2600mm we use 45mm aluminium roll tube.
For blinds greater than 2600mm wide we use 45mm heavy duty roll tube
Double Brackets (click picture for larger view)	Double Brackets Dimensions in mm (click picture for larger view)

Roman Blinds

Check out our Back Batton System, No Pin Holes, No Puckering, No Light Penetration!

New Roman Blind fabrics just released, now you can match your holland and roman blinds.

Roll over the small colours below to see a bigger view on the right.

Palm Beach Light Filtering & Block Out

Yoko Light Filtering & Block Out

Kashmir Block Out

Daintree Light Filtering & Block Out

Ritz Block Out

Check out our Back Batton System, No Pin Holes, No Puckering,
No Light Penetration!

New Roman Blind fabrics just released,
now you can match your holland and roman blinds.