Give your rooms superior privacy with Woodwind Privacy Plus™ Venetian Blinds. Privacy Plus™ uses a unique interlocking design which leaves the blind complete flat when shut. This innovative system assists with insulation, reduces light sneaking through and ensures greater privacy.
Available in five popular colours including white, off white and wood tones, Woodwind Privacy Plus™ venetians are guaranteed to retain their colour and texture for as long as you own them.
Order Your Free Colour Samples
|
|
|
|
Width
Minimum width: 260mm
Maximum width: 2400mm
Drop
Minimum drop: 300mm
Maximum drop: 3000mm
Flush mounting
Minimum
mounting depth of window frame required for inside mount:
70mm (including valance)
Operation
Left or right hand cord lock and tilter
Blinds less than 600mm must have split controls
Slat
50mm real American hardwood and thermal-polymer materials with a unique interlocking
design to increase privacy.
Head & Bottom Rail
Fully colour co-ordinated with the chosen slat
colour
Valance
Valance (pelmet) in the same colour as chosen slat
Ladder Cords
100% high tenacity polyester
Colour co-ordinated with chosen slat colour
Installation
All neccessary brackets and screws are supplied free of charge
30 day satisfaction
guarantee
(conditions apply)
Limited
lifetime warranty
(conditions apply)
|
Watch our How to Measure Video |
|
Things to Remember |
Always use a steel tape for accuracy
- make sure the tape measure is straight and tight when you
take your measurements
Always measure in millimetres (mm)
Measure all windows, even those that
appear to be the same width and height
Don't forget the stacking height of
your chosen blind (refer to the table at the bottom of this page)
Do not take any deductions (i seek will
do this for you) |
|
Inside Mount |
|
To measure a Venetian
blind on the inside of your window frame you need at least
70mm depth for a flush mount. With this depth, the blind
will go up and down without any obstruction.
Ensure you look for any
knobs, handles, winders or the inner window frame that may
obstructed the blind. If you have any obstructions you will
need to mount your blind to the outside of your window frame.
Where to Measure - Inside Mount |
| Width |
Where to
Measure - Top,
Centre &
Bottom
|
Measurement
to Take - shortest
|
Drop |
Where to
Measure - Left,
Centre & Right
|
Measurement
to Take - shortest
|
Do not take any deductions as we will do this for you.
Choose which side you want your controls - either
left or right and confirm you have measured the inside
of the frame.
|
|
Outside Mount |
|
To measure a Venetian blind on the outside
of your window frame measure the width from the edge of the architrave
to the edge of the architrave at the top of your window frame. This is where your brackets are to be mounted.
Measure the drop from the top of the architrave to the bottom of the architrave. This measurement may be increased if you want your blind to drop past the bottom of your window frame or to the floor.
Where to Measure - Outside Mount |
| Width |
|
Measurement
to Take - Actual
|
Drop |
|
Measurement
to Take - Actual
|
Choose which side you want your controls - either
left or right and confirm you have measured the outside
of the frame.
I Seek
Blinds will not make any deductions for outside mounted blinds. |
|
Corner Windows |
If you have a corner window where the blinds
need to meet for maximum privacy, measure one blind as a
through blind and one blind as a butt blind. When measuring
the butt blind you need to deduct 65mm off the measurement.
Call
I Seek blinds 1300 664 257 when ordering so we can get the
details we need to manufacture your valance for a perfect
fit. |
|
Stacking
Height
|
|
Stack Height - Raised Blind (Important to consider for door ways) |
Drop of blind (mm) |
800 |
1200 |
1600 |
2000 |
2400 |
2800 |
Stack height (mm) |
140 |
170 |
200 |
230 |
260 |
290 |
|
| Watch our How to Install Video - Inside Mount |
|
| Watch our How to Install Video - Outside Mount |
|
|
Inside
Mount
Your blind will come with installation brackets and screws.
Once unwrapped always handle your venetian blind from
underneath the metal head rail. Follow these steps for an
easy installation:
-
Always install your blind without the valance.
-
Your box brackets are marked left and right and must be installed with the flap hinged at the top and facing out.
(Figure 1 & 2)
-
Place 2 screws in each bracket either diagonally into the side of the window frame or through the top of the bracket into the underside of the window frame. (Figures 1 & 2)
-
For larger blinds install your centre support bracket in the middle of your window frame. This may have to be offset slightly if it interferes with the middle ladder tape of the blind. (Figure 3)
-
Open the flaps on your brackets, then insert your blind. (Figure 4)
-
Close both flaps and ensure you hear a 'click' as they lock into place. (Figure 5)
-
Install your valance.
-
Your blind is now installed - and can be lowered.
|
Figure 1
Figure 2
Figure 3
Figure 4
Figure 5
Figure 6
Figure 7
Figure 8
|
| Outside Mount |
Your blind will come with installation brackets and screws.
Once unwrapped always handle your venetian blind from
underneath the metal head rail. Follow these steps for an
easy installation:
-
Always install your blind without the valance.
-
Your box brackets are marked left and right and must be installed with the flap hinged at the top and facing out.
(Figure 6)
-
For larger blinds you will receive a centre support bracket. This is to be placed in the middle of your window frame, however it may have to be offset slightly if it interferes with the middle ladder tape of the blind. (Figure 7)
-
Place your brackets on the top edges of your architrave and mark 2 screw holes on each side with a pencil. (Figure 6)
-
If supplied mark screw holes for the centre support bracket. (Figure 7)
-
Drill all your pilot holes with a 2mm drill bit.
-
Screw your brackets into position (Figure 8).
-
Open the flaps on your brackets, then insert your blind. (Figure 4 - as per inside mount)
-
Close both flaps and ensure you hear a 'click' as they lock into place. (Figure 5)
-
Install your valance.
-
Your blind is now installed - and can be lowered.
|
| To
remove your blind |
-
Raise the blind.
-
Remove your valance
-
Unclip and open the flaps on each bracket.
-
Remove the blind by sliding it forward.
|
|
Regular cleaning of your Woodwind Privacy Plus Venetian blinds will help minimise dust buildup.
-
Extend your blinds all the way.
-
Tilt the slats up and dust lightly with a cloth or duster.
-
Tilt the slats down and dust the other side lightly with a cloth or duster.
-
To avoid damage, don’t exert too much pressure or crimp the slats.
-
A vacuum cleaner may also be used. Place the soft brush attachment on the hose and run very lightly over the slats first in their up position then in their down position. You should first test a small area of the blinds to make sure the suction is not too great. Some vacuums may damage the slats.
-
For individual stains on any given slat, spray with non-abrasive cleaner, wait 1 to 2 minutes, and wipe with a soft cloth.
|
|
Standard install - Both blinds back rolled
(click picture for larger view)
|
Front Rolled - Both blinds are front rolled
(click picture for larger view)
|
I Seek Blinds uses the best available aluminium roll tube for its roller blinds. This prevents any bowing of the roll tube resulting in wavy fabric. These specifications are the highest in the industry. |
For blinds up to 2100mm wide we use 40mm aluminium roll tube. |
|
For blinds widths between 2100mm and 2600mm we use 45mm aluminium roll tube. |
|
For blinds greater than 2600mm wide we use 45mm heavy duty roll tube |
|
Double Brackets
(click picture for larger view)
|
Double Brackets Dimensions in mm
(click picture for larger view)
|
