Plantation Shutters PVC - Window Mount

Inside Mount

Window recess depth

When measuring for inside mount frames, make sure that you have at least 65 mm clearance inside your window recess

Width

Measure the hard width across the top, middle and bottom of the window recess.

Drop

Measure the hard drop from the left, centre, and right of the window recess.

Write down the smallest width and drop measurement.

Note: Special attention should be given to window openings that have window winders, latches, security devices, removable screens etc, because they may obstruct the frame. This will determine whether you select a 4 sided or 3 sided frame.

*Do not take any deductions (iseekblinds will do this for you)

Outside Mount

Window requirements

Outside mount L Frames are used where there is less than 65mm clearance inside your window recess.  You need at least 25mm of flat surface to mount your shutter frame.

Width

Take three measurements from the edge of the architrave to the edge of the architrave at the top, middle and bottom on the window frame

Drop

Take three measurements from the top of the architrave to the bottom of the architrave at the left, centre, and right of the window opening

Write down the largest width and drop measurement.

*iseekblinds will not take any deductions for outside mounted blinds

Seeking inspiration? Let us share our updates with you on email

We’ll never share your email address and you can opt out at any time, we promise.