Save up to 50% off Roller Blind Motors and Pelmets | Sale ending soon - Order Now

How to Install Honeycomb Blinds

Getting Started

Installing your Honeycomb Blinds is easy, quick and simple.

We are here to help and will be with you every step of the way. 

If you have any challenges during installation, please give us a call on 1300 664 257, send us a  Quick Enquiry or book in for a personal  1:1 session on line.  One of our expert team members will work with you to achieve the stunning results you deserve.

Included with your Blinds

Included with your Honeycomb blinds - depending on which style of blind you have ordered, you will receive a pack with the following components:

Bracket Pack Cordless Honeycomb Blinds

Installation Kit - Cordless

Each iseekblinds Honeycomb Cordless Blind comes complete with the following supplied items:

  • Brackets 
  • Tabs - to raise or lower the blind
  • Installation screws - Michael recommends you purchase small 10mm pan head screws as these will give you a more secure finish.  Ensure you purchase the appropriate installation screws required for fixing into timber, masonry or plaster.

Bracket Pack Corded Honeycomb Blinds

Installation Kit - Corded

Each iseekblinds Honeycomb Cordless Blind comes complete with the following supplied items:

  • Brackets 
  • Tabs - to raise or lower the blind
  • Installation screws - Michael recommends you purchase small 10mm pan head screws as these will give you a more secure finish.  Ensure you purchase the appropriate installation screws required for fixing into timber, masonry or plaster.
  • Child Safety cleat

Installation Tool Kit - what you will need to install your blinds

  • A grey lead pencil
  • A small cordless drill to pre drill holes if required.
  • Pre drilling your bracket holes will avoid splitting your timber, particularly if you have an older style house.  It is also recommended for outside mounts.
  • Cordless screwdriver  
  • Installation screws have been supplied with your blind - however Michael recommends you purchase small 10mm pan head screws as these will give you a more secure finish.  Ensure you purchase the appropriate installation screws required for fixing into timber, masonry or plaster.
  • A leveler  
  • A step ladder if necessary

Organising your Blinds

Layout each of you blinds in front of the correct window.

Starting with the first blind, remove the packaging carefully.  Make sure you lay the blind down on a clean surface.  If your blind is a white colour, it is handy to wear white cotton gloves whilst installing to avoid getting any marks on the fabric.  Open the attached bag containing the brackets, screws, tabs or Child Safety cleat. 

Remove your brackets, tabs or child safety cleat and place them in front of the window, along with the installation screws.  

You are now ready to Install!

In this short video, Michael demonstrates just how simple and quick it is to install your Honeycomb Blinds

*Important: Please note the Procedure of Operation

In operating the Dual corded Day Night or the Dual Corded Top Down Bottom Up, please follow the below steps.  If you do not follow these steps, the cord inside the blind may be knotted and the blind will then be unable to operate.

Step 1: When lowering the blind - First lower the bottom rail, then move the middle rail to the desired position.

Step 2: When raising the blind - First move the middle rail upwards, then move the bottom rail up to the desired position.

Trouble Shooting

In this short video, Michael explains the importance of ensuring your brackets are level when installing your Honeycomb Blind

Get Fresh Updates on Email

We'll never share your email address and you can opt out at any time, we promise.