Plantation Shutters PVC

We aim to make it as easy as possible, instil confidence in your DIY skills and ensure you get it right. View our “How To Install” videos and utilise our resources, joining the thousands of happy customers who have mastered the simpleand easy DIY steps, achieved a great result and saved money in the process.


In case you can’t have your device nearby to watch the videos whilst installing, we’ve created some written instructions that you can print out and keep with you. These instructions have been written as easy to follow steps, as we want to make your DIY installation as simple and pain free as possible.


Getting Started

Installation Tool Kit
Installation Tool Kit - What you will need to install your blinds
  • A grey lead pencil
  • A small cordless drill to pre-drill holes if required.
  • Pre-drilling your bracket holes will avoid splitting your timber, particularly if you have an older style house. It is also recommended for outside mounts.
  • 5mm Drill bit 150mm long
  • Depending on the window frame material you will be installing your shutters into, make sure you purchase appropriate the Installation Screws - Timber, Masonry or Aluminium
  • Packers - Macsim brand
  • A step Ladder if necessary
  • A Spirit level
  • No More Gaps

 

Hoffman Keys
Explaining the 'Extra' Components

When you receive your Plantation Shutters, depending upon the layout and frame type you selected, you will receive some or all of these components

Hoffman Keys

These Hoffman keys will either be already inserted into the ends of your frames or come separately and you will need to insert them
Their job is to secure the frame pieces together for a 3 or 4 sided frame.

 

Panel Hinge packers
Explaining the 'Extra' Components

When you receive your Plantation Shutters, depending upon the layout and frame type you selected, you will receive some or all of these components

Panel Hinge Packers

Panel Hinge Packers may or may not be required to assist in bringing out the hinges on your panels a little bit.
Simply loosen the hinge screws and insert behind the hinge.

 

Panel Hinge Pins
Explaining the 'Extra' Components

When you receive your Plantation Shutters, depending upon the layout and frame type you selected, you will receive some or all of these components

Panel Hinge Pins

Panel Hinge Pins are how you attach the plantation Shutter panels to the frame.
Simply line up your panels with the corresponding hinges fitted on the frame and drop the pin in.
Your panels are now attached to the frame!

 

Striker Plates 4 sided frame
Explaining the 'Extra' Components

When you receive your Plantation Shutters, depending upon the layout and frame type you selected, you will receive some or all of these components

Striker Plates - 4 sided frame

These striker plates are attached to the bottom of the frame in line with where the panel meets the frame in the closed position.
Make sure they are aligned with the magnet on the panel for a secure closed position.
Use the screws provided.

 

Striker Plates 3 sided frame
Explaining the 'Extra' Components

When you receive your Plantation Shutters, depending upon the layout and frame type you selected, you will receive some or all of these components

Striker Plates - 3 sided frame

A 3 sided frame has no bottom.
These striker plates are attached to the base of the window frame in line with where the panel meets the window frame in the closed position.
Make sure they are aligned with the magnet on the panel for a secure closed position.

 

T-Post Brackets
Explaining the 'Extra' Components

When you receive your Plantation Shutters, depending upon the layout and frame type you selected, you will receive some or all of these components

T-Post brackets

These brackets are positioned on either side of your T-posts to hold them securely in place.
Simply screw them into the base of the window frame with a 3 sided frame or to the base of the frame with a 4 sided frame.
Use the screws provided.

 

Screws provided
Explaining the 'Extra' Components

When you receive your Plantation Shutters, depending upon the layout and frame type you selected, you will receive some or all of these components

Screws - gold with white tops

These screws are provided to use with the following:

  • 3 sided frame Striker plates
  • Hinges

*Important

Please note - These screws are not to be used for installing your frames. Ensure you purchase the appropriate installation screws depending on the window frame material you will be installing your shutters into - Timber, Masonry or Aluminium.

 

Screw caps
Explaining the 'Extra' Components

When you receive your Plantation Shutters, depending upon the layout and frame type you selected, you will receive some or all of these components

Screws caps - white

Supplied to cover your screws once you have finished installing your shutter
Michael prefers to buy the white stickers from Bunnings to use instead.

 

How to Install - Assembling the Frame

Plantation Shutters Assembling the Frame
Step 1 - L Frames & Z Frames

The process for assembling your frame is the same for an Inside Mount L & Z Frame as well as an Outside Mount L Frame.
Each part of the frame will be marked T (Top), B (Bottom), L (Left) or R (Right).
Working on a flat surface, lay the frame out in the correct position.
Once you have identified the top of the frame, get some masking tape and stick it to the top of the frame - this will ensure a correct installation.

 

Hoffman Keys
Step 2

The Hoffman keys will already be installed or you will need to insert them into the ends of each frame piece.
Working on a flat surface, use the Hoffman keys to attach the corners.
Then gently push the sides of the frames together using the palm of your hand

 

Plantation Shutters Assembling the Frame - T-Post
Step 3

T- Posts

If you have a T-post, it will sit inside the frame. Look for the holes marked at the top and the bottom of the frame.
Work with your Plantation Shutter Panel Layout Chartsto ensure your hinges are facing the correct way and make sure the T-post is not inserted upside down.
Using screws, secure the T-Post to the frame.
Your frame is now assembled

 

How to Install - Inside Mount L Frame & Z Frame

D-Mould is always on the Right hand panel
Step 1 - Getting started

This installation requires 8G x 40mm Screws
Take your time
Preparation is key
Stay level - Use your Spirit level. If you start level and true then the shutters are going to be installed perfectly, panels will open and close
Follow the steps in order
If you have more than one panel in your layout, you will receive a panel with a D Mould. The D-Mould stip covers the gap between the first and second panel when they are in the closed position. The D-mould will always be on the Right-Hand panel
Shutters 'dress up' - Make sure you attach your plantation shutter panels the right way up
It's a good idea to have someone to assist you - one to hold the panel and one to then insert the screws.

 

 
Step 2 - Packing your frame

You have already assembled your frame.
Place the frame inside your recess and jiggle it about to see what sort of gaps you have.
Then using your packers, insert them in around the frame. Make sure you use your spirit level to ensure everything is and remains square.
Once your frame is packed and square, get some more packers and place them around each of the corners for extra security.
This is to ensure the corners stay tight and the mitres won't open when you commence screwing the frame into the window recess.

Z Frame

When packing a Z frame you will need to insert your packers in behind the lip of the Z frame. The lip will hide the packers from view.

 

Plantation Shutters - Attaching the frame to the window recess
Step 3 - Pre-drill holes & secure the frame to the window recess

Where the packers are positioned, use your 5mm drill bit to pre-drill the holes through the L frame only - ie don't drill through into the window recess.
You don't need to use a lot of them - just space them evenly through each of the frame sides, top and bottom.
Then get your screws and using your drill, screw them into the L Frame and through so that they just 'bite' into the sides of the window recess.
Repeat this process around the frame until the frame is secure.

 

Plantation Shutters - Attaching the panel to the frame
Step 4 - Hanging the panels

When we present the panels we can see the shutter panel has one half of the hinge and the frame has the other.
Using the hinge pins included, simply present the panel to the frame, line up the hinges and drop the pin down so it connects the panel to the frame.
The hinge on the frame is only attached by the 2 oval shaped holes.
This means you have the flexibility to move your panel up or down as required to achieve the right fit.
If you loosen the screws, this will allow for approx 3mm - 4 mm of movement.
Once you have adjusted your panel height, make sure you then re-tighten the screws through the oval holes.
Then lock your hinge into position by inserting a 3rd screw into the round hole in the middle of the hinge. An important step to ensure your panels won't drop.

 

Striker Plates 4 sided frame
Step 5 - Striker Plates

Striker Plates - 4 sided frame

These striker plates are attached to the bottom of the frame in line with where the panel meets the frame in the closed position.
Make sure they are aligned with the magnet on the panel for a secure closed position. Use the screws provided.

Striker Plates - 3 sided frame

A 3 sided frame has no bottom.
These striker plates are attached to the base of the window frame in line with where the panel meets the window frame in the closed position.
Make sure they are aligned with the magnet on the panel for a secure closed position.

Your Plantation Shutter is installed!

Now everything should open and close nicely. If not make any minor adjustments as necessary.

 

Plantation Shutter Inside Mount L Frame
Step 6 - No more gaps

As shutter frames are not a tolerance fit, it is inevitable that you will end up with some gaps between the window frame and the frame of the plantation shutter.
These gaps can easily and quickly be filled using 'No More Gaps'.
This process will eliminate light from coming in between the 2 frames and your shutters will 'pop'.
No More Gaps is the finishing touch required to give you a professional end result.

 

How to Install - Outside Mount L Frame

 
Step 1 - Getting started

This installation requires:
PVC shutters - 8G x 75mm screws
Basswood shutters - 8G x 60mm screws
Take your time
Preparation is key
Stay level - Use your Spirit level. If you start level and true then the shutters are going to be installed perfectly, panels will open and close.
Follow the steps in order.
Watch the video on how to install Inside Mount L Frame first for more details.
If you have more than one panel in your layout, you will receive a panel with a D-Mould. The D-Mould stip covers the gap between the first and second panel when they are in the closed position. The D-mould will always be on the Right-Hand panel.
Shutters 'dress up' - Make sure you attach your plantation shutter panels the right way up.
It's a good idea to have someone to assist you - one to hold the panel and one to then insert the screws.

 

 
Step 2

Once you have assembled the frame, pre-drill your holes evenly around the L frame.

Please note:

PVC Outside Mount L Frame - screws are inserted underneath the cover strip. You will need to remove this strip when installing.
Basswood L- Frame - Screws are inserted through the lip section - there is no cover strip

 

 
Step 3

Hold the frame up to the architraves and attach it along the top of the architrave and add 1 screw towards the top of each side (Make sure you use the correct screws)
This means you can adjust the frame to ensure you mount it level.
Now present and attach the panels.
It's a good idea to have someone help you here.

 

Plantation Shutters - Attaching the panel to the frame
Step 4 - Hanging the panels

When we present the panels we can see the shutter panel has one half of the hinge and the frame has the other.
Using the hinge pins included, simply present the panel to the frame, line up the hinges and drop the pin down so it connects the panel to the frame.
The hinge on the frame is only attached by the 2 oval shaped holes.
This means you have the flexibility to move your panel up or down as required to achieve the right fit.
If you loosen the screws, this will allow for approx 3mm - 4 mm of movement.
Once you have adjusted your panel height, make sure you then re-tighten the screws through the oval holes.
Then lock your hinge into position by inserting a 3rd screw into the round hole in the middle of the hinge. An important step to ensure your panels won't drop.
Then attach your panels - note to ensure alignment

 

 
Step 4 - Ensure everything is level

Holding the bottom of the frame, shuffle from left to right until everything squares up.
Once the Plantation Shutter is in the perfect position, open the panel doors and finish attaching the frame all the way around onto the architraves.

PVC Outside Mount L Frame

Replace the cover strips.

 

Plantation Shutter Outside Mount L Frame
Step 5 - Striker Platess

Striker Plates - 4 sided frame

These striker plates are attached to the bottom of the frame in line with where the panel meets the frame in the closed position.
Make sure they are aligned with the magnet on the panel for a secure closed position. Use the screws provided.

Your Plantation Shutter is installed!

 

How to Install - Direct Mount

 
Step 1

One of the easiest Plantation Shutter installations.
A direct mount plantation shutter doesn't have a frame and it consists of just 1 or 2 panels only.
Take your time
Preparation is key
Stay level - Use your Spirit level. If you start level and true then the shutters are going to be installed perfectly, panels will open and close.
Follow the steps in order.
If you have more than one panel in your layout, you will receive a panel with a D-Mould. The D-Mould stip covers the gap between the first and second panel when they are in the closed position. The D-mould will always be on the Right-Hand panel.
Shutters 'dress up' - Make sure you attach your plantation shutter panels the right way up.
It's a good idea to have someone to assist you - one to hold the panel and one to then insert the screws.

 

 
Step 2 - Mounting the panel into the recess

With your Plantation Shutter, you will receive several screws with a white head on them and a couple of striker plates.
The hinges are already attached to the panel.
Open and present your hinge to the recess.
You will see that there are 2 oval shaped holes and a round hole on the hinge.
Get someone to hold the panel in position.
Screw the oval shaped top and bottom holes of the hinges into the recess first.
Adjust the panel to the correct position and ensure it's level.
Test the position by opening and closing the panel to see how it looks.
Make any adjustments required by moving the panel up and down within the oval-shaped holes on the hinge.
Then place a screw in the centre round hole to lock the panel into position.

 

Direct mounted Plantation Shutters
Step 3 - L-Striker Plates

Locate the magnet on the back of the shutter.
With the panel in the closed position line up the striker plate to where the magnet will touch
Install the striker plate into the recess at that exact position.
Secure with a couple of screws.
Your plantation Shutter is installed.

 

How to install U Channel

 
Step 1

A quick and easy installation
This installation requires:
8G x 30mm screws OR Double sided tape
Preparation is key
Follow the steps in order.
Shutters 'dress up' - Make sure you install your plantation shutter panels the right way up.

 

 
Step 2 - Installing the U Channels

You will have 2 U channels. 1 big and 1 small.
The big U channel goes at the top. The small U channel goes at the bottom.
Screw the big U channel into the top of the recess or you can use double-sided tape
Make sure the U channel is centred in the middle of the recess.
Line up the small U channel on the bottom of the recess to match the top U channel
Screw the small U channel down or again you can use double-sided tape.

 

Plantation Shutter U Channel installation
Step 3 - Inserting the Panels

Take your panel and lift it into the lip of the big U channel at the top of the recess.
Present the panel over the bottom U channel
And simply drop the panel down into position.
Your U channel installation is complete!

 

 

Why choose iseekblinds?

  • Australian Made
    Made in Melbourne, our blinds and curtains are manufactured with love and care, ensuring only quality products are delivered to you.

  • Quality fabrics & upgrade options
    We pride ourselves on providing the best quality fabrics at the most affordable prices. Our range of upgrades offer you luxury at great prices too.

  • Advice & FAQ’s
    We’re here to help. Contact our friendly team for advice, or check out our FAQs for answers online. Don’t forget about our videos and downloads too!

logo

Product Reviews

          4.8/5 See Reviews
logo

Google Reviews

          4.9/5 See Reviews

Seeking inspiration? Let us share our updates with you on email

We’ll never share your email address and you can opt out at any time, we promise.