Discount Double Roller Blinds Window Blinds Custom Window Shades Window Coverings

Enjoy two blinds on the one bracket with Double Roller Blinds. The latest innovation in blinds, Double Roller Blinds have been developed to fit two blinds onto the one bracket. This means you can have a Sunscreen Blind and a Blockout Blind on one window, without the space and installation concerns of two separate blinds. Choose from a wide range of colours to give your room that perfect finishing touch. For the Sunscreen Blind, you have the entire iseekblinds sunscreen range to choose from. And for the Blockout Blind, you have a wide range of beautiful fabrics to select from. Double Roller Blinds will bring an extra dimension to your room. Our commitment to quality All our blinds are cut using the latest ultra sonic cutting technology. This technology cuts and seals the fabric, preventing frayed and wavy edges, giving your blinds a perfect finish. What's great about our internal sunscreen fabrics is that they block between 86% and 95% of UV rays. So your flooring and furniture are protected from fading and they can help to reduce your energy consumption. World class quality Double Roller Blinds from iseekblinds.com.au are made with superior components and roll tubes. Standing proudly on the global scene, our compenents are the best when it comes to manufacturing blind components. For further details about our roll tubes, click on the specifications tab above. With our superior fabrics, components and our method of manufacturing, we believe you won’t find better Double Roller Blinds anywhere else.
	Pictured here: Front Rolled White Stome (Back Blind) & Urban Shade Pebble (Front Blind)
	Pictured here: Metal Chain & Anodised Aluminium Bottom Rail

Width
Minimum: 250mm
Maximum: Ranges between 2440mm & 3200mm depending on your chosen sunsceen fabric and your window drop.

Drop
Minimum drop: 300mm
Maximum drop: 3000mm

Flush mounting
Space required for inside mount - 122mm

Operation

Standard
Both blinds are back rolled
Front Rolled
Both blinds are front rolled
Combination Roll
Rear blind is back rolled and Front Blind is front rolled

I Seek Blinds uses the best available aluminium roll tube for its roller blinds. This prevents any bowing of the roll tube resulting in wavy fabric. These specifications are the highest in the industry.

For blinds up to 2500mm wide we use 38mm aluminium roll tube.

For blinds widths greater than 2500mm we use 50mm aluminium roll tube.

(also used for blinds widths between 2100 & 2500mm wide with a drop greater than 2100mm)

Standard Operation - Both blinds back rolled

Front Rolled Operation-
Both blinds are front rolled

Double Brackets
122mm x 122mm

Side Hems
No Side Hems

Bottom Rail
Exposed 25mm round bar with end caps
Colours available: White, Cream, Black or Anodised Aluminium

Chain
Continious loop chain - (no joiner)
Colours available: Metal, White, Cream or Black

Spring Assist
I seek blinds recommends blinds over 2000mm wide have a spring assist to enable easier lifting of heavier blinds (cost $60.00 per double blind).

Fabric Rolling Direction
See 'Operation' above

Brackets & Chain Winders
Colour's available Black, Grey, Cream & White.
These are colour co-ordinated with your fabric choice - or you may call or email a special request.

Installation
All neccessary brackets and screws are supplied free of charge

30 day satisfaction guarantee
(conditions apply)

Limited lifetime warranty
(conditions apply)

Sunscreen Blind Fabrics & Colours

The influence of colour	Light colour's	Dark colour's
Heat protection	Higher	Lower
Light transmittance	More	Less
View to outside	Less	More
Indoor glare	More	Less

iseek clearview The iseek clearview has a 5% openess factor with approximately 95% UV blockage. It is perfect where glare control is required and view to the outside should be preserved while maintaining excellent heat protection. *Maximum Width 3200mm & Maximum Drop 3000mm*

White/Stone	White	White/Linen

Linen	Ivory

Charcoal	Charcoal/Bronze	Charcoal/Grey

Bronze	Grey	White/Grey
iseek ultraview The iseek ultraview has a 14% openess factor with approximately 86% uv blockage. For maximum view while maintaining good heat & glare protection. *Maximum Width 2440mm & Maximum Drop 3000mm*

Custard Cream	Pearl White	Sand Dollar

Mushroom Sand	Pale Grey	Dusty Grey

Chocolate

Blockout Blind Fabrics & Colours

Fiesta Block Out Fiesta is a 100% blockout fabric that is 100% Polyester. Dust & Mould Resistant. Easy care wipe clean surface Maximum Width 3200mm & Maximum Drop 3000mm - Please note if width over 2400mm the maximum drop is 2100mm.

Fiesta White	Fiesta Chalk	Fiesta Cream

Fiesta Almond	Fiesta Calico	Fiesta Feather
Palm Beach Block Out Palm Beach is a 100% blockout fabric that is made using natural fibres and has an Acrylic Suede Foam coating. Maximum Width 3200mm & Maximum Drop 3000mm -Please note if width over 2400mm the maximum drop is 2100mm.

Palm Beach White	Palm Beach Beachsand	Palm Beach Natural

Palm Beach Eggshell	Palm Beach Barley	Palm Beach Antique

Palm Beach Samba	Palm Beach Sable	Palm Beach Stone

Palm Beach Chocolate	Palm Beach Slate
Urban Shade Block Out Urban Shade is a 100% Polyester Fabric with a Acrylic Suede Foam Backing (PVC Free). Maximum Width 3200mm & Maximum Drop 3000mm - Please note if width over 2400mm the maximum drop is 2100mm.

Urban Shade White	Urban Shade Birch	Urban Shade Barley

Urban Shade Alabaster	Urban Shade Quick Sand	Urban Shade Caramel

Urban Shade Pebble	Urban Shade Pewter	Urban Shade Seal

Urban Shade Charcoal	Urban Shade Black
Daintree Block Out Daintree is a 100% Polyester Fabric with a Acrylic Backing for a Block Out finish. Maximum Width 2950mm & Maximum Drop 3000mm

Daintree White	Daintree Moon Stone	Daintree Seed Pearl

Daintree Raffia	Daintree Jute	Daintree Nutmeg

Daintree Dove	Daintree Otter	Daintree Graphite

Daintree Mink	Daintree Black

Watch our How to Measure Video

Broadband Users	Dial-Up Users

Things to Remember

Always use a steel tape for accuracy - make sure the tape measure is straight and tight when you take your measurements

Always measure in millimetres (mm)

Measure all windows, even those that appear to be the same width and height

Do not take any deductions (i seek will do this for you)

Determine Type of Mount & Operation Type

Firstly you need to consider whether you can mount your blinds on the inside or outside of your window frame. The depth you need to flush inside mount your double roller blinds is 122mm for the 'Front Rolled Operation' & the 'Combination Roll Operation', however this can be as little as 60mm if you choose the 'Standard Installation Operation' (details below).

Operation - (See Specifications for more details)

Standard
Both blinds are back rolled
Front Rolled
Both blinds are front rolled
Combination Roll
Rear blind is back rolled and Front Blind is front rolled

In most cases the Sunscreen blind will be the back blind and the block out blind at the front. This can be reversed when you are outside mounting these blinds and wish to keep the block out blind closest to the window for better privacy and room darkening.

Inside Mount

Measure Roller Blinds Inside Mount

Where to Measure - Inside Mount
Width	Where to Measure - Top
	Measurement to Take - Actual
Drop	Where to Measure - Left
	Measurement to Take - Actual

Do not take any deductions as we will do this for you.

Choose which side you want your controls - either left or right and confirm you have measured the inside of the frame.

Outside Mount

Measure Roller Blind Outside Mount

To measure a double roller blind on the outside of your window frame measure the width from the edge of the architrave to the edge of the architrave at the top of your window frame.

Measure the drop from the top of the architrave to the bottom of the architrave. This measurement may be increased if you want your blind to drop past the bottom of your window frame or to the floor.

Where to Measure - Outside Mount
Width	Where to Measure - Top
	Measurement to Take - Actual
Drop	Where to Measure - Left
	Measurement to Take - Actual

Choose which side you want your controls - either left or right and confirm you have measured the outside of the frame.

I Seek Blinds will not make any deductions for outside mounted blinds.

Multiple Double Roller Blinds Together (Sliding Doors)

The same applies for multiple blinds as per the instructions above however, in this case you can mount the brackets back to back. If your window frame has three equal panels measure the overall distance and just divide by three.

If your sliding door or window panels are not equal, measure each section one at a time. The combined measurements that you give should be the same as the overall width. Once again measure the drop as per the instruction above.

Watch our How to Install Video - Inside Mount

Broadband Users	Dial-Up Users

Watch our How to Install Video - Outside Mount
Broadband Users	Dial-Up Users

Inside Mount

Your blind will come with installation brackets and screws. Follow these steps for an easy installation:

With your blind you will receive two brackets - One male (Fig 1) and one female (Fig 2). The male bracket is used for the chain control side of the blind. The female bracket mounts on the neutral (non-control) end.
Place 2 screws in each bracket as per Figure 1 & 2.
Install your back blind into the male bracket first (Fig 1) which is also the chain end. Before inserting the blind into the bracket make sure the two markings on top of the chain drive are facing upward (Fig 3).
Hold the chain end in position and move to the other end of the blind. Guide the metal spring loaded pin into the track of the female bracket until it clicks into position.
Your back blind is now installed - it can now be lowered using the chain control.
Repeat steps 3, 4 & 5 to install your front blind.
Once lowered place the plastic chain stops on the chain where it enters the chain drive. This will prevent the blinds from being rolled down too far.

Outside Mount

Your blind will come with installation brackets and screws. Follow these steps for an easy installation:

With your blind you will receive two brackets - One male (Fig 5) and one female (Fig 6). The male bracket is used for the chain control side of the blind (Fig 5). The female bracket mounts on the neutral (non-control) end (Fig 6).
Hold the brackets level with the edge of the architrave. With a pencil mark the 2 screw holes for each bracket (Fig 4).
Drill a pilot hole in the middle of each marking with a 2mm drill bit.
Now use the screws provided to fix the brackets to the window frame.
Install your back blind into the male bracket which is also the chain end, making sure that the two lines at the top of the chain drive are facing upward (Fig 3).
Hold the chain end in position and move to the other end of the blind. Guide the metal spring loaded pin into the track of the female bracket until it clicks into position.
Your back blind is now installed - it can now be lowered using the chain control.
Now repeat steps 5,6 & 7 to install your front blind.
Once lowered place the plastic chain stops on the chain where it enters the chain drive. This will prevent the blinds from being rolled down too far.

To remove your blinds

To remove your blinds one at a time, turn the large wheel at the neutral end (Fig 7) anti clockwise. This action will slide the metal pin inward and the blind will slide out of the bracket.

Fig 7. Remove the blind by twisting the end until the metal pin retracts
Figure 7

Double Bracket Inside Mount
Figure 1

Double Bracket Female Inside Mount
Figure 2

Fig 3. Showing the two markings to be place upward when installing the blind.
Figure 3

Double Bracket Mark Screw Holes
Figure 4

Double Bracket Male Outside Mount
Figure 5

Double Bracket Male Outside Mount
Figure 6

Sunscreen Blind

Remove dust with vacuum cleaner or compressed air. Do not scrub.
Do not use solvents or any abrasive substance that might damage the coating of the fabric.
Clean with a sponge or soft brush dipped in soapy water.
Rinse with clear water.
Leave the blind down until completely dry.

Fiesta Blockout

Dust regularly and remove marks by sponging gently with mild detergent in luke warm water.

Premium White Light Blockout

Dust regularly and remove marks by sponging gently with mild detergent in luke warm water.

Palm Beach Blockout

This fabric should be regularly dusted/vacuumed with the appropriate attachment.
Do not wash/dry clean. If spot cleaning is required, test in inconspicuous area first using a mild detergent solution.
Do not allow blinds to become fully wet.
Use damp cloth only.
Warm iron if required.

Mercury Light Filtering & Blockout

This fabric should be regularly dusted/vacuumed with the appropriate attachment. Do not wash/dry clean.
If spot cleaning is required, test in inconspicuous area first using a mild detergent solution.
Do not allow blinds to become fully wet.
Use damp cloth only.
Warm iron if required.

Tuscany Light Filtering & Blockout

This fabric should be regularly dusted/vacuumed with the appropriate attachment. Do not wash/dry clean.
If spot cleaning is required, test in inconspicuous area first using a mild detergent solution.
Do not allow blinds to become fully wet.
Use damp cloth only.
Warm iron if required.

Dunes Blockout

This fabric should be regularly dusted/vacuumed with the appropriate attachment. Do not wash/dry clean.
If spot cleaning is required, test in inconspicuous area first using a mild detergent solution.
Do not allow blinds to become fully wet.
Use damp cloth only.
Warm iron if required.

Comet Blockout

This fabric should be regularly dusted/vacuumed with the appropriated attachment. Do not wash/dry clean.
If spot cleaning is required, test in inconspicuous area first using a mild detergent solution.
Do not allow blinds to become fully wet.
Use damp cloth only.
Warm iron if required.

Kiribati Light Filtering & Room Darkening

This fabric should be regularly dusted/vacuumed with the appropriated attachment. Do not wash/dry clean.
If spot cleaning is required, test in inconspicuous area first using a mild detergent solution.
Do not allow blinds to become fully wet.
Use damp cloth only.
Warm iron if required.

Urban Shade Blockout

This fabric should be regularly dusted/vacuumed with the appropriate attachment. Do not wash/dry clean.
If spot cleaning is required, test in inconspicuous area first using a mild detergent solution.
Do not allow blinds to become fully wet.
Use damp cloth only.
Warm iron if required.

5th Avenue Blockout

This fabric should be regularly dusted/vacuumed with the appropriate attachment. Do not wash/dry clean.
If spot cleaning is required, test in inconspicuous area first using a mild detergent solution.
Do not allow blinds to become fully wet.
Use damp cloth only.
Warm iron if required.

Open your eyes to a better way to buy better blinds.

Double Roller Blinds

Our commitment to quality

World class quality

iseek clearview

iseek ultraview

Blockout Blind Fabrics & Colours

Fiesta Block Out

Palm Beach Block Out

Urban Shade Block Out